MINI POWER UNIT FOR MEDICAL FACILITY
Product Description
This hydraulic power unit is specially designed for electric operating bed in Medical Equipment, Hydraulic Power Unit For Car,with low noise,low current and light weightjt provides hydraulic power source for the operation bed,Hydraulic Lifter Remover,And it is also suitable for hospital bed.Car Lift Hydraulic Power Unit.
Model Specifications
| Type 型号 | Motor 电机 | Pump Displacemen t 泵排量(cc/r) | Tank Capacit y 油箱容积(L) | Pressure 压力 (MPa) | Mounting 安装方式 | Oil Port 油口尺寸 | |
| H PU1-02BAABH H ADAA | 24V 0.5Kw 2000rpm | 0.25 | 1.0 | 10 | 卧式
| G1/4"(可定制ORCUSTOMIZE | |
| HPU1-02BAACHHACAA | 0.5 | 6.5 |
Special Notes
1、 For different flow rate pump, pressure and motor power, please check the ordering guidance.
2、 This motor is based on gap working system S2=2 ~ 4min(continuous working time), so it cannot run continuously.
3、 Before installation, the cylinder, oil pipe, joint and Other hydraulic components must be cleaned and free from any impurities.
4、 The viscosity of hydraulic oil should be 15-68cst and should be clean and free of impurities.HM46 hydraulic oil is recommended.
5、 If you need manual oil discharge device for emergency , please specify when ordering.
6、 Check that whether there is enough oil in the oil tank immediately after the first operating of the system.
7、 The hydraulic oil should be replaced after the first 100 hours' use of the system, and change the oil every 3,000 hours after that.
Contact us if you need more details on Directional Control Valve Function. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Hydraulic Pump Case Drain Flow、Aircraft Auxiliary Power Unit. If these products fail to match your need, please contact us and we would like to provide relevant information.Product Categories : Old Products