High Quality Medical Infusion Pump, Volumetric Infusion Pump, Dual Mode Infusion Pump Suppliers in China

Home > Products > infusion & syringe pump > CE Mark Medical Dual Mode Infusion Pump

CE Mark Medical Dual Mode Infusion Pump

Basic Info

Model No.:  JYK-801E

Product Description

Model NO.: JYK-801E Display: LCD Specification: CE Mode: Two Mode Trademark: JYK Origin: China Medical Equipment, Dual Mode Infusion Pump JYK-801E

The Features of Dual Mode Infusion Pump
1. Two optional modes, drip-rate mode and volumetric mode.
2. Complies with IEC 60601, high safety designation with dual CPUs.
3. High brightness LCD display and user-friendly operation interface.
4. Easy switch among d/min, mL/h and volume/time units.
5. Available for Bolus mode.
6. Anti-reverse function on motor to prevent upstream.
7. Self-check when start up and during infusion.
8. Top pressure sensor for preventing underflow.
9. Pressure and air-in-line detection devices both with 8 sensitivities setting, dynamically display pressure value.
10. IV set management function: Up to 20 IV sets can be added, stored and deleted in memory, convenient for operation after calibration.
11. Adjustable 8 volume levels of alarm for convenient operation in different environments.
12. CE certified.
Infusion Mode Drip-rate and volumetric
Pumping Mechanism Peristaltic finger pump
Optional Infuse Rate Unit d/min, mL/h and volume/time
IV Sets Standard IV sets of 10, 15, 20 and 60d/mL, with diameter 3.4 ~ 4.5mm.
FlowRate Range 1.0 ~ 1200 mL/h
DripRate Range 10 d/mL IV set: 1.0 ~ 200 d/min
15 d/mL IV set: 1.0 ~ 300 d/min
20 d/mL IV set: 1.0 ~ 400 d/min
60 d/mL IV set: 1.0 ~ 150 d/min
Increment From 0.1 mL/h to 99.9 mL/h, 0.1 mL increment;
≥100 mL/h, 1 mL increment.
Flow Rate Accuracy ≤ ± 5% (after calibration)
Drip Rate Accuracy ≤ ± 1.5%
Volume Limit 1 ~ 9999 mL
Volume Infused Display 0 ~ 9999 mL & >9999 mL
Purge Rate 600 mL/h
KVO Rate 1 mL/h
Bolus Mode Available for Bolus mode,flow rate adjustable.
Occlusion Pressure Upstream and downstream pressure detection device with 8 sensitivities setting, 40 ~ 140KPa.
Air-in-line Detection Air bubble detected by ultrasonic and the device with 8 sensitivities setting,50 ~ 1000μL.
Alarm Volume 8levels setting
IV Set Management and Flow Rate Calibration IV sets can be added, stored and deleted in memory, convenient for operation after calibration.
Anti-reverse Function Anti-reverse function on motor to prevent upstream
Self-check Self-check when start up and during infusion
Audio and Visual Alarms Air-in-line, Door open, Upstream occlusion, Downstream occlusion, Infusion finished, No operation, Leakage, Bottom empty, Battery low, Pump error, Motor reverse, AC power lost, etc.
Display Blue LCD with high brightness
Power Source AC: 100V ~ 240V, 50Hz/60Hz, ≤ 25VA
Battery Rechargeable Ni-MH battery: DC12V, 2000mAh, life: ≥ 4 hours at 25mL/h, remaining battery displayed.
Operating Conditions Temperature: 5°C ~ 40°C
Relative humidity: 20% ~ 90%
Atmospheric pressure: 70 ~ 106KPa
Storage Conditions Temperature: -20°C ~ 55°C
Relative humidity: 10% ~ 90%
Atmospheric pressure: 70 ~ 106KPa
Classification Class II, CF, IPX4
Dimensions and N.W. 150mmx 150mm x 235mm; 2.3kg
Application Intravenous infusion for various liquid medicines, such as vascular expansion solution, anticancer drug, accelerative procreates drug, liquid nutrient, etc.
Applicable for micro and rapid infusion.

Contact us if you need more details on Medical Infusion Pump. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Dual Mode Infusion Pump、Syringe Pump. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : infusion & syringe pump

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters